SUBCATEGORIES

1 ELECTRONIC LED SIGNS STOP
2 ELECTRONIC LED SIGNS K-20
3 ELECTRONIC LED SIGNS P-32
4 INFORMATIVE LED SIDNS FOR RESIDENTIAL AREAS (VMS)
5 INFORMATIVE LED SIDNS FOR VEHICLES
6 INFORMATIVE LED SIGNS FOR MOTORWAYS (VMS)

LED SIGNS

ODOSIMANSI C. CHRONIS SA in the context of the continuous evolution and always following the technological developments in the field of labeling, manufactures and markets a vast range of electronic boards for both public and private work.

The electronic LED signs may indicate messages with instructions, advice or information on the movement and incorporate conventional signs or regulatory risk on traffic (eg speed limit). They are divided into electronic-illuminated signs and informational-led electronic signs (VMS):

Electronic-illuminated signs are placed in areas where there is insufficient light at night while forming an elegant labeling proposal for municipal squares, curbs, dividers lanes etc.

The informative-electronic LED signs (VMS) is flashing high-brightness LED elements, so that the display is clearly visible in sunny weather conditions and can resist any message.

Led electronic billboards are proven best protection dangerous intersections, pedestrian crossings, schools and roads with frequent violations of STOP, speed limits and other signals on traffic.

ELECTRONIC LED SIGNS STOP

The panel is manufactured from 3mm thickness aluminium sheet, with type III reflective film. In the eight corners of the panel we install ultrahigh brightness LEDs with emission angle of at least 120 ° and intensity 1W. The panel will light at a frequency of 44 flashes per minute (44Hz).

The intensity of the brightness of the LEDs, is adjustable so that during the day to provide the maximum brightness and during the evening to present little brightness. This way we avoid blinding the driver.

The construction will incorporate a special rotating fixation system in order to allow the placement of the solar panel in the optimum orientation. The battery box and the charging element will be placed at the back side of the sign. All parts will be manufactured from aluminium or from galvanized steel.

ELECTRONIC LED SIGNS K-20

It is manufactured from high brightness flashing LEDs, so that the display is clearly visible and during high sunshine conditions. The case is completely waterproof, made of aluminium, powder coated, while the front side of the sign is covered by a special piece of polycarbonate sheet that protects from ultraviolet radiation.

Features : The indication is consisted by white LED while there are red on the perimeter in the shape of the triangle. The frame of the construction has dimensions 75x75x7 cm and has appropriate slot (socket) for powering the plate with current 220V/50Hz and automatic switch that in the event of vehicle collision onto pole to automatically interrupt the power supply to avoid electric shock. Complies with the European Standard EN 12966 (categories L2 and L3).

Mounting : The placement of the electronic sign it is done on a galvanized pole 3’’ height 2.50m with fixation to the ground with concrete.

ELECTRONIC LED SIGNS P-32

Features : The speed limit indication (50/80/90 etc) or the indication STOP is consisted by white LED while there are red on the perimeter. The frame of the construction has dimensions 75x75x7 cm and has appropriate slot (socket) for powering the plate with current 220V/50Hz and automatic switch that in the event of vehicle collision onto pole to automatically interrupt the power supply to avoid electric shock. Complies with the European Standard EN 12966 (categories L2 and L3).

Mounting : The placement of the electronic sign it is done on a galvanized pole 3’’ height 2.50m with fixation to the ground with concrete.

INFORMATIVE LED SIDNS FOR RESIDENTIAL AREAS (VMS)

The change of the desired message is easily done using a modem or permanent Rs485 serial line connection or a mobile phone and a computer.

Features :

Multipage Messages
Animation
Fonts with proportional character spacing
Flashing per line
Flashing of only a part of the line
Left, center, top, bottom centering text
Directional arrows
Time, date and temperature

INFORMATIVE LED SIDNS FOR VEHICLES

MOBILE CAR-TOP DISPLAYS are suitable for mounting on police cars, emergency and service vehicles in order to protect areas of intervention or work areas and to divert traffic when necessary. M-SPOT mobile car-top displays are attached to emergency, police or service vehicles and in flat position do not affect their speed. On site, the displays can be quickly put in the upright position. Driving speed limit with display in upright position is 80 km/h.

M-SPOT 3

Pre-programmed with three standard traffic symbols:

caution
directional arrows (left and right)
plus two yellow or blue flashing LED-lights in the upper corners of the board that can be switched on separately

M-SPOT 5

Pre-programmed with five standard traffic symbols:

caution
traffic jam
no overtaking
directional arrows (left and right)
plus two yellow or blue flashing LED-lights in the upper corners of the board that can be switched on separately

Technical data :

Power supply

12 V (via in-car cigarette lighter)

Typical dimensions

800x800x100 mm (M-SPOT 3 / 5)

830 x 830 x 100 mm (M-SPOT GP)

950x850x150 mm (M-SPOT 3 / 5 inc. mounting frame and motor)

980x880x150 mm (M-SPOT GP inc. mounting frame and motor)

Weight

39 kg incl. mounting frame and motor (M-SPOT 3 / 5)

48 kg (M-SPOT GP)

INFORMATIVE LED SIGNS FOR MOTORWAYS (VMS)

The need for immediate information of the users of motorways and highways on traffic conditions such as accidents, special emergency transport – movements, works in progress, large traffic flow, weather conditions (rain, snow, slippery, etc) – and in order to achieve maximum driver safety, requires the use of variable message signs on roads.

The display or change of the messages on the signs (VMS) can be easily done using a modem or a permanent serial line Rs485 connection or a mobile phone and a computer. The variable message signs (VMS) is manufactured in accordance with the European regulation EN 12966. It is fully weatherproof. The frame is produced from aluminium or stainless steel.